Configuring the correct IP address is essential for connecting Hikvision surveillance devices to a local network.
Whether you are installing a Hikvision IP camera, NVR, or DVR, proper network settings help ensure reliable communication between devices.
This guide explains how to find, change, and verify the IP address of a Hikvision device.
Step 1: Find the Device’s IP Address
Before changing the network settings, identify the device’s current IP address.
Some Hikvision devices use 192.0.0.64 as their factory default IP address. However, the default address may vary depending on the model, firmware version, and network configuration.
A convenient way to locate a Hikvision device is to use the Hikvision SADP Tool.
To find the device:
- Connect the Hikvision device to your network.
- Connect your computer to the same local network segment.
- Download and install the official Hikvision SADP Tool.
- Open SADP and allow it to discover compatible Hikvision devices.
- Locate your device and check its current IP address.
If the device is already accessible through its web interface, you can also check its network settings directly.
Step 2: Log In to the Hikvision Device
Once you have identified the IP address, open a supported web browser and enter the device’s address.
For example, if the device uses 192.168.1.64, enter that address in your browser.
The computer must have a valid network path to the device.
When the login page appears, enter the correct administrator username and password.
Many Hikvision devices use admin as the administrator username, but there is no universal default password for all models.
Modern Hikvision devices generally require activation and the creation of an administrator password during initial setup.
If the device has not been activated, complete the activation process before proceeding.
Step 3: Open the Network Settings
After logging in, locate the device’s network configuration menu.
Depending on the model and firmware version, the settings may be found under a menu such as:
Configuration → Network → Basic Settings → TCP/IP
Other models may use different menu names or navigation paths.
In the network settings, you can typically view the current IP address, subnet mask, default gateway, and other available network parameters.
Step 4: Configure the IP Address
Hikvision devices commonly support two IP address configuration methods.
Option 1: DHCP
When DHCP is enabled, the device automatically obtains its network settings from a DHCP server, usually the router.
This option is convenient for networks where automatic IP address assignment is preferred.
However, the assigned address may change unless the router is configured to reserve a specific address for the device.
Option 2: Static IP Address
A static IP address is often useful for surveillance installations where devices need predictable network addresses.
To configure a static IP address:
- Disable DHCP or select the manual IP configuration option.
- Enter an available IP address within the appropriate network range.
- Configure the correct subnet mask.
- Enter the default gateway if required.
- Configure DNS servers if needed.
For example, on a network using the 192.168.1.x address range, a possible configuration is:
| Network Parameter | Example |
|---|---|
| IP Address | 192.168.1.100 |
| Subnet Mask | 255.255.255.0 |
| Default Gateway | 192.168.1.1 |
| DNS Server | As required by the network |
These values are examples only. Use settings appropriate for your actual network.
Before assigning a static IP address, make sure it is not already being used by another device.
Step 5: Save and Apply the Network Settings
After entering the new network parameters, click Save or Apply, depending on the device interface.
The device may apply the new IP address immediately.
As a result, the existing browser connection may be interrupted because the device is no longer using its previous address.
Some models or configuration changes may require a restart, but changing an IP address does not always reboot the device.
If you cannot reconnect, verify the new address using the SADP Tool.
You can also use SADP to modify supported network parameters after providing the required device authentication.
Step 6: Verify the New IP Address
After applying the changes, confirm that the device is accessible.
Follow these steps:
- Make sure your computer can communicate with the new IP address.
- Open a supported browser.
- Enter the device’s new IP address.
- Log in using the correct credentials.
- Check the network settings to confirm the changes.
You can also use the SADP Tool to verify the device’s current IP address.
If the device is not accessible, check the following:
- The IP address was entered correctly.
- The subnet mask matches the network configuration.
- The default gateway is correct.
- No other device is using the same IP address.
- The network cable and Ethernet connection are working.
- The computer has a valid network path to the device.
If the Hikvision device is connected through an NVR’s built-in PoE ports, remember that the camera network may use a different subnet from the NVR’s main LAN interface.
Conclusion
Correct IP address configuration is an important part of setting up Hikvision surveillance equipment.
By identifying the current IP address, accessing the network settings, choosing DHCP or a static address, and verifying connectivity, you can help ensure reliable communication between Hikvision cameras, NVRs, DVRs, and other network devices.
For easier device discovery and network configuration, the official Hikvision SADP Tool is a useful option.
Always refer to the documentation for your specific Hikvision model, as network settings and available configuration options may vary.